Owners: Thomas Spowart & Co., Ltd., Lassodie Collieries, by Dunfermline.A 'trial' Leadside Mine was driven to the west of the Leadside Pit at Wellwood, north of Dunfermline. It is believed to have been driven around the time that anthracitised Splint Coal was being encountered in the workings to the north and to the west of the Leadside No. 1 Pit in the late 19th century. A later Leadside Mine, however, is known to have operated around the 1930s in the same area close to the burn known as the Lead. It was located a few hundred yards north of the site of the Waterloo Pit.
Click on Map to Zoom In
Information on coals worked at the Leadside Mines, Wellwood(based on reports from 1900 and 1930)Reference is made to the driving of a Leadside Mine in a quote from a 1900 report describing the deterioration of the Splint Coal in the Leadside No. 1 Pit. It states, "The deterioration commenced always next to the roof or at the top of the seam, and increased downwards as the workings advanced, until the whole seam was affected - the coal first losing its brilliancy, and assuming a blueish-black tint, and then accompanied by a very soft and dangerous shale roof, in which the lines of fracture were reversed, gradually losing also the hardness and lamification of Splint Coal, until it passed into an entire cinder. At this stage, the working "faces" were stopped, and a trial mine, about six feet in width, was driven for several hundred yards to near the north march of Mr. Wellwood's coal-field, where it adjoins Lord Elgin's coal, lying under the lands of Colton, but without coming to anything better - the seam being still at the "face" of the mine in the state of a soft and comparatively worthless anthracite. The Splint Coal seam, for nearly the whole of the north part of Leadside Farm, is in this state, and also to the west, with the exception of a portion adjoining the Elgin field." In Leadside Mine, the Fourteen Foot Coal seam, a steam
coal, consisted of an upper 3 ft. leaf and a lower 2 ft. leaf
separated by a parting of 1 ft. to 2 ft.
Can do with help on these mines |