Good mornng,
I've just been perusing your website and it is easily the best website on Scottish mining I've seen. Many thanks for that, it has evoked many memories for me.
The following text is a short history of where me and my family fitted into Fife's mining activities and it may well be that it is of more interest to me than anybody else. However, I hope you find something of interest and a reason to rake out more old memories wouldn't be refused if there was some information you think I could provide.
The whole family worked in the coal industry. My father originally served as an apprentice engineer in the Nellie Colliery and my mother worked in the wages department of the Lochgelly Iron & Coal Company's offices next to the colliery.
Following nationalisation the doors to the Lochgelly Iron & Coal Company's offices were shut and locked (more of which anon).
I was born in 1946 and grew up in Lochgelly. My father at this time had moved and worked as an engineer in the Aitken Colliery. At that time my uncle (Willie Walkingshaw) was 'pug driver' at Lumphinans No. 1 and, being close to where I lived, I used to visit there as a child regularly. My uncle moved from that job to become winding engineman and I remember No. 1's winding engine house interior well (with its cage of canaries).
I went down Lumphinans No. 1 sometime around 1951/2 (I reckon there aren't many left who could say they went down Lumphinans No. 1 now) and 'signed' the visitor's book when I returned.
Sometime later my uncle moved to become winding engineman at Lumphinans Nos. 11, 12. He was a man to respect having his standards to maintain. He polished and cleaned No. 12 winding engine religiously. Nos. 11, 12 winders were in the same building but No. 11 was never cleaned . He reckoned the other two enginemen should have done their bit.
Because of dermatitis in his hands (from wood he had handled at No. 1 he reckoned) I used to go once a month to Nos. 11, 12 and do a lot of the cleaning and polishing of No. 12's winder for him. At that tender age I walked all the way down the railway line to the colliery.
As a treat I would go down either No. 12 or No. 11 or the surface mine with the fireman for an hour or two whilst he did his checks (and luxury personified, a shower in the pithead baths). No. 12 was a circular concrete shaft with rope guides and a smooth ride. No. 11 was a rectangular wooden shaft with 12 x1 2 pitch pine guides and it was a very rough ride.
This visiting arrangement lasted for about five or so years during which I remember the arrival of a Lee Norse miner I think it was called. It was too big for the cage and was slung under to go down to the No. 11 inset called the Lochgelly high bottom. The low bottom was the pump house which seemed to me to be a rather grand affair all neatly painted and lit.
Around 1960 a skip wind had been installed in No. 11 on one side only with a water ballast on the other side. Sometime later the winding rope broke and wrecked the shaft. Shaftsmen (shankers) from the surrounding pits were called in to help clear it all up. The work went on for months. The shaftsman in charge was 'Baldy' Gibson. A character and a half.
During this time I started work as an apprentice electrician at Comrie Colliery where I remained for seven years. When Cowdenbeath Technical College accepted all these new apprentices for training they lacked space. So, someone came up with the idea that the old Lochgelly Iron & Coal Coy. offices might be pressed into use. The College organised four apprentices to go and clear the place out and I was one. I walked into the offices that my mother had left about 16 or 17 years before. The Company had used an outbuilding to store records and at the time my mother's wages ledgers were still there undisturbed.
Working in Comrie No. 2 winding engine house one day I looked across at No. 1 and proclaimed I could only see one rope. Indeed, it did have only one rope. It had overwound , the rope detached and came over the pulley wheels, the detaching hook hitting one of the cross braces. Bouncing off that it came through the front of the winding engine house and landed on the floor. The bend in the cross brace was visible until Comrie closed.
The cause was the electricians attempting to change the braking system no-volt coil from the winder during 'piece-time'. At this time both skips were empty and balanced so the electricians emptied the hydraulic reservoir to remove the tension on the braking mechanism and allow the removal of the pins and bolts from the no-volt coil.
Unfortunately, the replacement took too long. The pit bottomer looked at his watch, '';piece-time' was finished so he dropped 25 tons of coal into the skip. Now unbalanced with no brakes the winder slowly gathered speed sending one cage to the bottom and the other into the Ormerod detaching hook. Quite an event. The deputy chief electrician, Tom Cherry, took the blame but it was the workshop foreman, Bob Selby who was on the job.
I left the NCB around 1968/9 and went to work in the surface mining industry starting at Westfield. The next 15 years ,or so, were as chief electrician for the Murphy Mining Group who opencast Scottish coal from Fife to Shotts. The last site I equipped in Scotland (Headless cross) was near Shotts when I constructed the Ruston Bucyrus 1260W dragline. At over 2000 tons is was somewhat bigger than an AB15!
As I said at the beginning, the whole family were in the coal industry and perhaps it is worth a mention that my young brother started working life as an apprentice surveyor in Comrie too. He worked for the NCB all his life and was head of surveying for the NCB, in Derby, when it all stopped. His particular expertise was in attending inquiries as a subsidence expert explaining why the cracks in your house had nothing to do with the mine workings underneath. He might well have some answers to any surveying or geological questions you might have.
Hope this tale is of some interest to you.
Tom Malcolm