Wilson Pit, Halbeath

The Wilson Pit of the Halbeath Colliery was located approximately 400 yards north-west of the present-day level crossing on the Halbeath-Kingseat road, and is believed to have worked the Five Foot Coal seam to the east of Pleasance.

Click on Map to Zoom In

Information on coals worked at, or near, Wilson Pit, Halbeath

(based on a report from 1930)

The best development of Mynheer Coal was in the southern part of the Halbeath coalfield, where a thickness of about 3 ft. was usually recorded, and a clayband ironstone rib in the blaes above the coal formed a good roof.
Around Clarkston, on the downthrow side of the Halbeath Station fault, a narrow strip of the seam was present near the surface and may not be worked out.
The section, taken from a boring, had the following composition:

Description Thickness
IRONSTONE 8 in.
Fireclay 1 ft. 2 in.
Sandstone 1 ft.
Blaes 11 in.
COAL 2 ft. 8 in.
Blaes, coaly 9 in.
COAL 9 in.
Fakes -

On the north side of the fault, the coal is 'off' in the Brisk and Wilson Pits, and must be near the surface at the Whitefield Pit. Farther east, at the Burn Pit, Cuttlehill, the Mynheer Coal was proved at 45 fathoms from the surface.


See West Fife Index entry
Halbeath Colliery
for historical and general information

Can do with help on this pit.


Go Home