Lochhead (Old) Pit, West Wemyss

Owners: Wemyss Coal Co. Ltd.

The old Lochhead Pit (not to be confused with the Lady Lilian Pit which became the 'new' Lochhead Pit) lay 300 yds. to the south of Lochhead farm to the west of Coaltown of Wemyss, and is thought to have been sunk to the Branxton Coal seam around 1838. The pit was probably worked for a few years only (final closing date not known).
The opening of the Lady Lilian Pit, to the north of this older working, took place around 1890.

Click on Map to Zoom In

Information on coals worked at, or near, the Lochhead (Old) Pit
(based on plans and a 1900 report)

The following information is sourced from a plan also showing underground workings in the Branxton Coal at the pit dated 1839:

Description Depth
Bowhouse Coal 9 fms.
Branxton Coal 15 fms
More Coal 26½ fms
Boreland Coal 37½ fms.
Sandwell Coal 41½ fms.
Dysart Main Coal 78½ fms.
Seven Feet Coal 92 fms.

Branxton Coal thickness was typically 42 in.
but ranged from 31 in. - 58 in.

A good section in the Branxton workings had the following composition:

Description Thickness
Blaes -
Coal 4 ft. 10 in.
Fireclay 4 in.
Coal 1 ft. 1 in.
Fireclay -

At the old Lochhead Pit, which was two miles to the north-east of Dysart, the Dysart Main Coal seam was 20 ft. 1 in. thick and had the following structure:

Description Thickness
Shale roof -
Coal 2 ft.
Stone 1 ft. 6 in.
Stone 3 in.
Coal 3 ft. 6 in.
Stone 4 in.
Coal 11 in.
Stone 4 in.
Coal 7 ft.
Stone 1 in.
Coal 3 ft.
Shale -

It was apparently normal practice not to work the top and the bottom of the coal. In a boring little more than a mile to the N.N.W. of Lochhead, the Dysart Main Coal seam was found to be only 10 ft. thick. Again, at Cameron Bridge, three miles to the north-east of Lochhead, its thickness was also 10 ft.


Plans of Abandoned Seams for Lochhead (Old) Pit, Wemyss Pits or Mines designated in Plans
COAL; Branxton (1839) Lochhead

Go Home