|
People may be surprised to find that coal and ironstone
were mined so near to the old university town of St Andrews.
The Radernie Duffie or Duffo Coal persisted into the Denhead
area where it contained a layer of ironstone, known and
worked in the 19th century as the Winthank or Denhead
Blackband Ironstone.
Click on Maps to Zoom
In
Extracts from Statistical Account of Fife
|
| Source Date of Information (Owner) |
|---|
| Manager / Under-Manager / Men underground / Men above ground / Coals seams worked |
| 1908 (Laing Bros., Denhead) |
| ------------ / ------------ / 2 / 1 [not specified] |
| 1911 (Laing Bros., Denhead) |
| ------------ / ------------ / 1 / 1 [not specified] |
--------------------------------------
The Five-Feet Limestone in the parishes of St Andrews and Cameron overlay the Black Band Ironstone formerly worked at Denhead and elsewhere. The Black Band Ironstone lay 50 or 60 ft. below the Five-Feet Limestone.
Coal - and probably ironstone - was being worked in the pit close to Elderbank and Denhead in the mid-nineteenth century (on 1856 OS map) but the shaft about ¼ mile to the north of this old coal pit is thought to have been sunk probably towards the end of the century.
Records of many of the older workings do not appear to be available but
some information has been gleaned from a plan (William Eadie) of the coal
workings in the Duffo and Brasso seams by Laing Bros., in their early
twentieth century venture just north of Winthank Muir, which was close to
the old road leading to the Winthank Limeworks.
Laing Brothers, Mine Owners, apparently prospected in this field
from around 1907. They worked the Duffo and Brasso seams but owing to
so many faults and troubles, and coming on old waste in the Duffo
seam, they were compelled to abandon the workings and to retreat back
to the stoop between the return air-way and the dook.
A section of the strata at this Denhead coalwork is given below:
| Description | Thickness |
| Blaes Very Soft | 12 ft. 6 in. |
| PARROT COAL } | 1 ft. |
| IRONSTONE } DUFFO, Seam | 2 ft. 6 in. |
| COAL } | 1 ft. 8 in. |
| Faikes | 4 ft. |
| Blaes | 2 ft. 3 in. |
| Faikes | 3 ft. 9 in. |
| Lime Stone Foul | 2 ft. 6 in. |
| Faikes | 5 ft. 6 in. |
| COAL } | 10 in. |
| Dirt } | 4 in. |
| SPLINT COAL } BRASSO, Seam | 1 ft. 2 in. |
| Fire Clay | 3 ft. 6 in. |
| Sand Stone | 4 ft. |
| Schists | 7 ft. |
| Mountain Limestone |
-----------------------------
The coal-bearing strata of the East of Fife were more broken up with large faults than they were in the Central and Western parts of the Kingdom, and much more disrupted and altered by the intrusion of igneous rocks. There can be no doubt that these drawbacks arrested the development of coal mining in the district. Much of the workable coal was exhausted down to shallow depths before the end of the nineteenth century and the deeper parts, together with those where the workings were stopped by faults or by injected whinstone, have only been worked for a few years into the twentieth century. Most of the coal-mining was carried on here before pumping machinery had arrived and it was abandoned when the engine then in use could no longer keep down the underground water. It is to be feared that older mining plans of many portions of the old East Fife coalfields, formerly largely worked, have been either lost or destroyed, and that little or no information now exists regarding the structure and condition of these tracts. Happily, by an Act of Parliament, it became law to officially deposit copies of all mining plans in the Home Office, where they are ultimately available for future guidance.
The Brassie Coal worked in this area of north-east Fife
lay about 50 feet above the Hurlet Limestone and was reported
to be as thick as 3 feet.
An example of a typical Brassie Coal section is given in the
table below:
| Description | Thickness |
| Limestone | 4 ft. |
| Fakes (shaly sandstone) | 0 - 4 ft. |
| COAL | 2 ft. 3 in. |
| Sandstone | - |
The Duffie Coal was reported to be as thick as 3 ft. 6 in. in this coalfield and an example of a typical section is given in the table below:
| Description | Thickness |
| Blaes (shale) | - |
| COAL | 1 ft. 3 in. |
| Stone | 2 ft. 6 in. |
| COAL | 2 ft. 9 in. |
| Sandstone | - |
-------------------------
... Between Ladeddie Hill and Denhead lies the
Denork-Denhead Coalfield, a tract of poorly exposed ground
with evidence of old coal workings. On the present structural
interpretation of the area, this belt of ground is bounded
northwards by an east-north-easterly fault, one of the
Ceres-Maiden Rock group of faults. Coarse sandstones outcrop
below Denork and on Ladeddie Hill, while a bluff of coarse
sandstone immediately to the south Denork Craig contains the
opening to a small coal mine. ... Near Elderburn Farm there
are waste tips indicating the site of an old working
[Denork Colliery], and smaller tips are present about
400 yds. further east [ an early Denhead pit].
The various old reports, boreholes, and plans provide
information about the seams which were worked in this
vicinity but no general section of the strata can be pieced
together from these sources. ... The seam extracted near
Elderburn Farm was called the Denork Gas Coal and a plan of
the workings, dated 1889, is available. ...
The composition of the seam described in this report had:
| Description | Thickness |
| Coal | 2 ft. 7 in. |
| Stone | 2 in. |
| 'Parrot' Coal | 2 ft. 3 in. |
This seam is the lowest encountered, and is overlain by about 8 fathoms of strata containing two coals each about 3 ft. in thickness. All these coals were encountered in Denork No. 5 Borehole (ca 1883) nearby. In the region of the more easterly tips mentioned above, old records refer to earlier workings in seams named, from below upwards, the 'Cave' Coal, 3 ft. to 4 ft. thick, the 'Scrumpie' Coal, 20 in. thick, and a second 'Parrot' Coal. If these seams are in unbroken sequence with those already described, they must lie at a stratigraphical horizon 49 to 66 fathoms above them. ...
... The Radernie Brassie Coal was formerly worked to a small extent as the Low Little or Low Lime Coal at Cassindonald Colliery, 1 mile to the south of the Denhead shafts and in the area between Winthank Limeworks and Denhead. According to old reports by mining engineers, its thickness varies between 18 in. and 26 in. There is no record of the Brassie Coal at Lumbo ...
... According to the old mining reports, the equivalent of the Radernie Duffie Coal was worked for lime-burning on Craigtoun Common, between Denhead and Winthank, for many years before the value of its associated blackband ironstone was discovered. After about 1847 the ironstone and coal were worked together until the ironstone was exhausted, about 1866. ...
... The ironstone, known variously as the Denhead, Winthank, or Craigtoun Blackband Ironstone, and here named the Denhead Blackband Ironstone, was generally about 20 in. thick. It dies out southwards and was not found at Cassindonald Colliery. It was still present at the westerly limit of the Denhead workings, but no trace of it was found either in the Drumcarro area, or at Backfield of Ladeddie. It was, however, found to be present in typical development at Lumbo about 1½ miles to the north-east of Denhead. ...
... The strata between the Radernie Duffie Coal and the Charlestown Main Limestone were reported to contain two thin coals of poor quality in the Denhead-Cassindonald area; a bed of 'limestone' about 2 ft. thick was often recorded between them. ...
| Plan of Abandoned Seams for Denhead | Pits or Mines designated in Plan |
|---|---|
| Brasso; Duffo; (31 December, 1911) | DENHEAD |
| See also Coalfields link: Old Coalfields of East Fife |
|---|